Winch 10 - DMX Winch (Up to 10 kg load)

Product Description

With the Winch 10 you have many opportunities to create beautiful scenic movements, to create a brand new or extend the existing stage design. It has been widely applied on stages all over the world such as theaters, concert halls, venues and much more.

The flexible design of the Winch 10 makes your lifting of objects much more efficient. You can control the winch via DMX, so there is no manual handling by pulling the wires or likewise. All effects can be automated thus perfect for integrating in your scene and lighting show. Easy to control at your lighting desk.

It is possible to lift medium sized stage props up to 10 kg. So, for instance you can lift screens, drapes and much more both inside and outside of the stage area.

Wahlberg Winch 10 – A flexible solution:

The practical application the Winch 10 is very diverse, and it can be used and implemented in the stage design in several different ways. For instance, you can connect several Winch 10’s to lift simultaneously. This is great for lifting large items or several items at the same time.

Combined with the easy control of the movements from the lighting desk, it is only your imagination that sets the limit of how you can use the Winch 10. It is great for adding beautiful moving stage effects creating a dynamic show with smooth automatic movements of your elements on stage.

The standard Winch 10 has a lifting height of 10m (33 ft). You can operate the winch within this range, and you can adjust the top and bottom limits to meet the requirements of your setup and surroundings. Thus, the operating range is also flexible depending your setup.

Technical Specifications:

• Item number: 241
• Lifting capacity: 10 kg (22 lb)
• Lifting height: 10 m (32.8 ft)
• Lifting speed: 5-30 cm/s (2-11.8 in/s)
• Voltage: 115/230 VAC
• Frequency: 50-60 Hz
• Power consumption: 120 W (1,1/0,6 A)
• Power inlet: Neutrik powerCON TRUE1 NACPX (F/M)
• DMX control signal: DMX 512 1990+DMX512A
• DMX channels: 7
• DMX control connection: 5 Pole XLR (F/M)
• Snap hook: 8 mm (5/16 in) galvanized steel
• Fleet angle: None
• Fleet travel: None
• Overload capability: 125 %
• Minimum load: 0,45 kg (0.99 lb)
• Noise emission: ≈55 dB at 1 m (3.3 ft)
• Ambient temperature: 5-40 °C (41-104 °F)
• Mounting clamp: 1 x Slim eye coupler 42-52 mm (2 in)
• Motor: 24 VDC, 54 W
• Duty cycle: 30 % when running more than 10 min.
• Lifting wire 2 mm (5/64 in) 7×7 galv. steel wire (EN 12385-4)
• Minimum wire: breaking load 280 kg (2746 N / 617 lb)
• Wire safety factor: >10
• Expected lifting wire lifetime – 2,5 kg (5.5 lb) load: Up to 80000 full cycles
• Expected lifting wire lifetime – 5 kg (11 lb) load: Up to 20000 full cycles
• Expected lifting wire lifetime – 10 kg (22 lb) load: Up to 15000 full cycles
• Shipping weight: 7 kg (15.4 lb)
• Weight: 5,5 kg (12,1 lb)
• Dimensions: 205 x 148 x 246 mm (8.1 x 5.8 x 9.7 in)