Product Description
– 4 channel amplifier
– 2800 W per channel at 4 ohms
– Versatile, compact and highly energy-efficient
– Dante networked audio
The DX-100I are DSP processing amplifiers that offer the same power outputs as the DX-100. The DX-100I accepts analog, AES3 digital and optional Dante networked audio. The DX-100I can connect to any source and make it available over the network, as well as processing four additional channels with local analogue outputs to connect to non-DSP DX Series amplifiers. These auxiliary processed outputs can also be fed onto the network, and used by non-DSP DX amplifiers that have Dante cards fitted, or by any other Dante enabled device. Connectivity for remote control is covered by USB, Ethernet and RS485, with a relay of either USB or Ethernet control via RS485 to work with legacy products.
TECHNICAL DATA
Stereo Mode (both channels driven)
8 ohms EIA 1 kHz 1% THD |
4 x 1400 W |
4 ohms EIA 1 kHz 1% THD |
4 x 2800 W |
2 ohms EIA 1 kHz 1% THD |
4 x 3500 W |
Bridge Mono Mode
8 ohms EIA 1 kHz 1% THD |
2 x 5600 W |
4 ohms EIA 1 kHz 1% THD |
2 x 7000 W |
Frequency Response |
0.5 dB (20 Hz – 20 kHz) |
Total Harmonic Distortion (20 Hz-20 kHz) |
< 0,1 % |
Damping Factor @ 8 ohms |
> 500 |
Voltage Gain |
32 dB |
Output Circuitry |
Class D |
AC Requirements |
7.5 A, 240 VAC (4 ohms)
15. A, 120 VAC (4 ohms) |
Dimensions (H x W x D) |
8.8 x 48.2 x 42.8 cm
3.5 x 19 x 16.9 in |
Weight |
10.9 kg (24) lb |