DA11ABL-WP-EU - Bluetooth & Analogue Audio Dante® Wall Plate EU

Product Description

The DA11ABL-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport, and magnetic faceplate design allows for Decora backbox compatibility. The DA11ABL-WP is the ideal BYOD interface to allow any Bluetooth device to stream audio wirelessly to a Dante® audio system.

Key Features:

• Dante® network wall plate interface for Bluetooth and analogue L/R audio inputs, and L/R audio outputs
• Converts 2ch Bluetooth, or un-balanced audio sources to Dante® audio
• Converts 2x Dante® audio channels to un-balanced audio outputs
• Configurable Bluetooth naming allows for simple discovery of the unit
• Adjustable input sensitivity from +24dBu to -28dBV via control software
• Adjustable output gain from +20dBu to -28 dBV via control software
• Supports: 44.1, 48 & 96kHz sample rates @ 16, 24 or 32 Bit
• Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)
• Supports AES67 RTP audio transport
• Features Class 0 IEEE 802.3af PoE for powering of product from any PoE switch
• Supports power via 12V DC adapter (supplied) for when network switch does not support PoE
• Magnetic faceplate surround allowing for both UK & EU backbox compatibility

*Dante® is a registered trademark of Audinate Pty Ltd

Specifications:

• Audio Input Connectors: 1 x Analogue Left / Right audio (3.5mm stereo jack) 
• Audio Output Connectors: 2 x Analogue RCA (Left / Right)
• Network Connectors: 1 x PoE Dante® Ethernet Connection (RJ45)
• Bluetooth: Bluetooth V5.0 – SBC / MP3 / AAC / APT-X / APTX-LL / APTX-HD, 44.1K-48KHz 16 / 24Bit
• Configuration Switches: 1 x Push button (connect / selection)
• Firmware  Upgrade: 1 x Micro-USB UART port
• Module Dimensions (W x H x D): 74mm x 74mm x 50mm (without faceplate)
• Faceplate Dimensions (W x H x D): 85mm x 85mm x 5mm
• Cut Out Dimensions (W x H x D): 52mm x 55mm x 38mm
• Mounting Hole Spacing: UK 60mm CTC, EU 60mm CTC
• Backbox Mounting Depth: 40mm (minimum), 47mm (recommended), UK or EU single gang
• Shipping Weight: 0.3kg
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: – 4°F to 140°F (- 20°C to 60°C)
• Power Supply: Class 0 IEEE 802.3af PoE or 12v/1A DC 2-Pin Phoenix connector